Considering an ECU remap for your Subaru Liberty 3.6VCT 260hp? A Stage 1 remap can take this 2014 -> petrol engine from 260 BHP to 290 BHP and from 350 Nm to 410 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Liberty can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Subaru Liberty 3.6VCT 260hp is a 3.6L naturally aspirated petrol engine producing 260 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 410 Nm — a gain of around 30 BHP (12%) and 60 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine |
|---|
| BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 2.0GT-S 295hp | 295 → 325 | +30 | 400 → 460 | +60 | Moderate (4.5/10) |
Get a personalised remap quote for your Subaru Liberty. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
