Considering an ECU remap for your Toyota ProAce 2.0 D-4D 128hp? A Stage 1 remap can take this 2014 - 2016 diesel engine from 128 BHP to 190 BHP and from 320 Nm to 400 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota ProAce can achieve.
The Toyota ProAce 2.0 D-4D 128hp is a 2.0L turbocharged diesel engine producing 128 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 400 Nm — a gain of around 62 BHP (48%) and 80 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 D-4D 90hp | 90 → 115 | +25 | 180 → 260 | +80 | Excellent (8.5/10) |
| 2.0 D-4D 150hp | 150 → 190 | +40 | 370 → 450 | +80 | Good (7.5/10) |
Get a personalised remap quote for your Toyota ProAce. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
