Considering an ECU remap for your Volvo Trucks FE 240hp? A Stage 1 remap can take this 1e generatie diesel engine from 240 BHP to 315 BHP and from 920 Nm to 1215 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo Trucks FE can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Volvo Trucks FE 240hp is a 7.2L turbocharged diesel engine producing 240 BHP and 920 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 315 BHP and 1215 Nm — a gain of around 75 BHP (31%) and 295 Nm (32%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Volvo Trucks FE. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
