Considering an ECU remap for your Volvo Trucks FE 320hp? A Stage 1 remap can take this 1e generatie diesel engine from 320 BHP to 395 BHP and from 1200 Nm to 1600 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo Trucks FE can achieve.
The Volvo Trucks FE 320hp is a 7.2L turbocharged diesel engine producing 320 BHP and 1200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 395 BHP and 1600 Nm — a gain of around 75 BHP (23%) and 400 Nm (33%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Volvo Trucks FE. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
