Expected gains of +25 BHP and +40 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chrysler Crossfire 3.2 SRT6 335hp? A Stage 1 remap can take this 2003 - 2008 petrol engine from 335 BHP to 360 BHP and from 420 Nm to 460 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Crossfire can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Chrysler Crossfire 3.2 SRT6 335hp is a 3.2L naturally aspirated petrol engine producing 335 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 460 Nm — a gain of around 25 BHP (7%) and 40 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine |
|---|
| BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 3.2 V6 218hp | 218 → 233 | +15 | 310 → 330 | +20 | Moderate (4/10) |
Get a personalised remap quote for your Chrysler Crossfire. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.