Expected gains of +15 BHP and +20 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chrysler Crossfire 3.2 V6 218hp? A Stage 1 remap can take this 2003 - 2008 petrol engine from 218 BHP to 233 BHP and from 310 Nm to 330 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Crossfire can achieve.
The Chrysler Crossfire 3.2 V6 218hp is a 3.2L naturally aspirated petrol engine producing 218 BHP and 310 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 233 BHP and 330 Nm — a gain of around 15 BHP (7%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.2 SRT6 335hp | 335 → 360 | +25 | 420 → 460 | +40 | Limited (3.5/10) |
Get a personalised remap quote for your Chrysler Crossfire. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.