Ford F-250 6.2 V8 385hp Remap

Name: Ford F-250 6.2 V8 385hp ECU Remap
Brand: Ford

Expected gains of +30 BHP and +31 Nm torque

Get Your Free Quote ↓

BHP+30 hp (8%)

Standard

385 hp

Tuned

415 hp

Torque+31 Nm (6%)

Standard

549 Nm

Tuned

580 Nm

Suitability

Limited (3.5/10)

Gains Profile

Limited headroom

Headroom

Low

Ford F-250 6.2 V8 385hp ECU Remapping

Considering an ECU remap for your Ford F-250 6.2 V8 385hp? A Stage 1 remap can take this -> 2020 petrol engine from 385 BHP to 415 BHP and from 549 Nm to 580 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-250 can achieve.

How this engine compares

3rdof 6 Ford F-250 engines by power gain
39%of the 9,842 engines we hold gain data for see a smaller power increase
19%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Ford F-250 6.2 V8 385hp is a 6.2L naturally aspirated petrol engine producing 385 BHP and 549 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 415 BHP and 580 Nm — a gain of around 30 BHP (8%) and 31 Nm (6%).

This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!Naturally aspirated engine: gains are usually limited; results vary widely.

!High tuned torque: check transmission torque capacity and service history.

Other F-250 -> 2020 Engines

Engine

Technical Specifications

Fuel Type: Petrol
Aspiration: Naturally Aspirated
Displacement: 6.2L
Capacity: 6200 CC
Type: Car
Engine Family: Ford 6.2L V8 NA Petrol

ECU & Transmission

Likely ECU Low confidence: Petrol ECU (varies by market/year)
Gearbox Low confidence: Manual and automatic options vary; some models use Powershift (dual-clutch) automatics. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Ford F-250. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeFord

ModelF-250

Generation-> 2020

Engine6.2 V8 385hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

5.4 V8 320hp	320 → 340	+20	529 → 550	+21	Limited (3.5/10)
6.0 V8 325hp	325 → 345	+20	772 → 795	+23	Moderate (5/10)
6.4 V8 350hp	350 → 390	+40	881 → 930	+49	Moderate (5.5/10)
6.7 V8 400hp	400 → 440	+40	1084 → 1140	+56	Moderate (5.5/10)
6.7 V8 440hp	440 → 470	+30	1166 → 1200	+34	Moderate (5/10)