Considering an ECU remap for your Ford F-250 6.4 V8 350hp? A Stage 1 remap can take this -> 2020 diesel engine from 350 BHP to 390 BHP and from 881 Nm to 930 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-250 can achieve.
The Ford F-250 6.4 V8 350hp is a 6.4L turbocharged diesel engine producing 350 BHP and 881 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 390 BHP and 930 Nm — a gain of around 40 BHP (11%) and 49 Nm (6%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 5.4 V8 320hp | 320 → 340 | +20 | 529 → 550 | +21 | Limited (3.5/10) |
| 6.0 V8 325hp |
| 325 → 345 |
| +20 |
| 772 → 795 |
| +23 |
| Moderate (5/10) |
| 6.2 V8 385hp | 385 → 415 | +30 | 549 → 580 | +31 | Limited (3.5/10) |
| 6.7 V8 400hp | 400 → 440 | +40 | 1084 → 1140 | +56 | Moderate (5.5/10) |
| 6.7 V8 440hp | 440 → 470 | +30 | 1166 → 1200 | +34 | Moderate (5/10) |
Get a personalised remap quote for your Ford F-250. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
