Considering an ECU remap for your Ford Figo 1.2 Ti-VCT 96hp? A Stage 1 remap can take this 2018 -> ... petrol engine from 96 BHP to 115 BHP and from 120 Nm to 138 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
The Ford Figo 1.2 Ti-VCT 96hp is a 1.2L naturally aspirated petrol engine producing 96 BHP and 120 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 138 Nm — a gain of around 19 BHP (20%) and 18 Nm (15%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 TDCI 101hp | 101 → 120 | +19 | 215 → 270 |
| +55 |
| Good (7.5/10) |
| 1.5 Ti-VCT 123hp | 123 → 145 | +22 | 150 → 163 | +13 | Moderate (4.5/10) |
Get a personalised remap quote for your Ford Figo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
