Considering an ECU remap for your Ford Figo 1.5 TDCI 101hp? A Stage 1 remap can take this 2018 -> ... diesel engine from 101 BHP to 120 BHP and from 215 Nm to 270 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
The Ford Figo 1.5 TDCI 101hp is a 1.5L turbocharged diesel engine producing 101 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 270 Nm — a gain of around 19 BHP (19%) and 55 Nm (26%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2 Ti-VCT 96hp | 96 → 115 | +19 | 120 → 138 | +18 | Moderate (5/10) |
| 1.5 Ti-VCT 123hp | 123 → 145 | +22 | 150 → 163 | +13 | Moderate (4.5/10) |
Get a personalised remap quote for your Ford Figo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
