Considering an ECU remap for your Ford Figo 1.5 Ti-VCT 123hp? A Stage 1 remap can take this 2018 -> ... petrol engine from 123 BHP to 145 BHP and from 150 Nm to 163 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
The Ford Figo 1.5 Ti-VCT 123hp is a 1.5L naturally aspirated petrol engine producing 123 BHP and 150 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 163 Nm — a gain of around 22 BHP (18%) and 13 Nm (9%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2 Ti-VCT 96hp | 96 → 115 | +19 | 120 → 138 |
| +18 |
| Moderate (5/10) |
| 1.5 TDCI 101hp | 101 → 120 | +19 | 215 → 270 | +55 | Good (7.5/10) |
Get a personalised remap quote for your Ford Figo. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
