Iveco Cursor 13 - 540 - 540hp Remap

Name: Iveco Cursor 13 - 540 - 540hp ECU Remap
Brand: Iveco

Expected gains of +80 BHP and +400 Nm torque

Get Your Free Quote ↓

BHP+80 hp (15%)

Standard

540 hp

Tuned

620 hp

Torque+400 Nm (17%)

Standard

2350 Nm

Tuned

2750 Nm

Suitability

Good (7/10)

Gains Profile

Balanced

Headroom

Medium

Iveco Cursor 13 - 540 - 540hp ECU Remapping

Considering an ECU remap for your Iveco Cursor 13 - 540 - 540hp? A Stage 1 remap can take this All diesel engine from 540 BHP to 620 BHP and from 2350 Nm to 2750 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Cursor can achieve.

How this engine compares

1stof 10 Iveco Cursor engines by power gain
95%of the 9,842 engines we hold gain data for see a smaller power increase
99%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Iveco Cursor 13 - 540 - 540hp is a turbocharged diesel engine producing 540 BHP and 2350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 620 BHP and 2750 Nm — a gain of around 80 BHP (15%) and 400 Nm (17%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!High tuned torque: check transmission torque capacity and service history.

Other Cursor All Engines

Engine	BHP	Gain	Torque

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Type: Commercial
Engine Family: Iveco Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17-era diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Iveco Cursor. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeIveco

ModelCursor

GenerationAll

Engine13 - 540 - 540hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

8 - 240 - 245hp	245 → 315	+70	950 → 1250	+300	Excellent (8/10)
8 - 270 - 272hp	272 → 340	+68	1115 → 1400	+285	Good (7.5/10)
8 - 310 - 310hp	310 → 380	+70	1115 → 1400	+285	Good (7.5/10)
8 - 350 - 350hp	350 → 420	+70	1280 → 1600	+320	Good (7.5/10)
13 - 380 - 380hp	380 → 460	+80	1800 → 2200	+400	Good (7.5/10)
10 - 400 - 400hp	400 → 480	+80	1900 → 2300	+400	Good (7.5/10)
10 - 430 - 430hp	430 → 510	+80	1900 → 2300	+400	Good (7/10)
13 - 440 - 440hp	440 → 520	+80	2100 → 2500	+400	Good (7/10)
13 - 480 - 480hp	480 → 560	+80	2200 → 2600	+400	Good (7/10)