Considering an ECU remap for your Iveco Cursor 8 - 310 - 310hp? A Stage 1 remap can take this All diesel engine from 310 BHP to 380 BHP and from 1115 Nm to 1400 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Cursor can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Iveco Cursor 8 - 310 - 310hp is a turbocharged diesel engine producing 310 BHP and 1115 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 380 BHP and 1400 Nm — a gain of around 70 BHP (23%) and 285 Nm (26%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 8 - 240 - 245hp | 245 → 315 | +70 | 950 → 1250 | +300 | Excellent (8/10) |
| 8 - 270 - 272hp | 272 → 340 | +68 | 1115 → 1400 | +285 | Good (7.5/10) |
| 8 - 350 - 350hp | 350 → 420 | +70 | 1280 → 1600 | +320 | Good (7.5/10) |
| 13 - 380 - 380hp | 380 → 460 | +80 | 1800 → 2200 | +400 | Good (7.5/10) |
| 10 - 400 - 400hp | 400 → 480 | +80 | 1900 → 2300 | +400 | Good (7.5/10) |
| 10 - 430 - 430hp | 430 → 510 | +80 | 1900 → 2300 | +400 | Good (7/10) |
| 13 - 440 - 440hp | 440 → 520 | +80 | 2100 → 2500 | +400 | Good (7/10) |
| 13 - 480 - 480hp | 480 → 560 | +80 | 2200 → 2600 | +400 | Good (7/10) |
| 13 - 540 - 540hp | 540 → 620 | +80 | 2350 → 2750 | +400 | Good (7/10) |
Get a personalised remap quote for your Iveco Cursor. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
