Considering an ECU remap for your Lotus Exige S 3.5 V6 350hp? A Stage 1 remap can take this All petrol engine from 350 BHP to 360 BHP and from 400 Nm to 415 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lotus Exige can achieve.
The Lotus Exige S 3.5 V6 350hp is a 3.5L naturally aspirated petrol engine producing 350 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 415 Nm — a gain of around 10 BHP (3%) and 15 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.8 192hp | 192 → 205 | +13 | 185 → 200 | +15 |
| Moderate (4/10) |
| S 221hp | 221 → 240 | +19 | 215 → 230 | +15 | Moderate (4/10) |
| Cup R 3.5 V6 366hp | 366 → 375 | +9 | 413 → 430 | +17 | Limited (3/10) |
| Cup 3.5 V6 436hp | 436 → 460 | +24 | 440 → 470 | +30 | Limited (3.5/10) |
Get a personalised remap quote for your Lotus Exige. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
