Considering an ECU remap for your Lynk & Co 3 1.5T 178hp? A Stage 1 remap can take this 2018 -> petrol engine from 178 BHP to 190 BHP and from 265 Nm to 305 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lynk & Co 3 can achieve.
The Lynk & Co 3 1.5T 178hp is a 1.5L turbocharged petrol engine producing 178 BHP and 265 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 305 Nm — a gain of around 12 BHP (7%) and 40 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5T 154hp | 154 → 190 | +36 | 245 → 305 | +60 | Good (7.5/10) |
| 2.0T 187hp | 187 → 230 | +43 | 300 → 450 | +150 | Excellent (8/10) |
Get a personalised remap quote for your Lynk & Co 3. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
