Expected gains of +45 BHP and +142 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mack MP10 515 - US07 - 16.1 515hp? A Stage 1 remap can take this All diesel engine from 515 BHP to 560 BHP and from 2380 Nm to 2522 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP10 can achieve.
The Mack MP10 515 - US07 - 16.1 515hp is a turbocharged diesel engine producing 515 BHP and 2380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 560 BHP and 2522 Nm — a gain of around 45 BHP (9%) and 142 Nm (6%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 565 - US07 - 16.1 564hp | 564 → 610 | +46 | 2675 → 2900 | +225 | Moderate (5.5/10) |
| 605 → 660 |
| +55 |
| 2793 → 3150 |
| +357 |
| Good (6.5/10) |
Get a personalised remap quote for your Mack MP10. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.