Expected gains of +55 BHP and +357 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mack MP10 605 - US07 - 16.1 605hp? A Stage 1 remap can take this All diesel engine from 605 BHP to 660 BHP and from 2793 Nm to 3150 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP10 can achieve.
The Mack MP10 605 - US07 - 16.1 605hp is a turbocharged diesel engine producing 605 BHP and 2793 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 660 BHP and 3150 Nm — a gain of around 55 BHP (9%) and 357 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 515 - US07 - 16.1 515hp | 515 → 560 | +45 | 2380 → 2522 | +142 | Moderate (5.5/10) |
| 565 - US07 - 16.1 564hp | 564 → 610 | +46 | 2675 → 2900 | +225 | Moderate (5.5/10) |
Get a personalised remap quote for your Mack MP10. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.