Expected gains of +46 BHP and +225 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mack MP10 565 - US07 - 16.1 564hp? A Stage 1 remap can take this All diesel engine from 564 BHP to 610 BHP and from 2675 Nm to 2900 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP10 can achieve.
The Mack MP10 565 - US07 - 16.1 564hp is a turbocharged diesel engine producing 564 BHP and 2675 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 610 BHP and 2900 Nm — a gain of around 46 BHP (8%) and 225 Nm (8%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 515 - US07 - 16.1 515hp | 515 → 560 | +45 | 2380 → 2522 | +142 | Moderate (5.5/10) |
| 605 - US07 - 16.1 605hp | 605 → 660 | +55 | 2793 → 3150 | +357 | Good (6.5/10) |
Get a personalised remap quote for your Mack MP10. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.